How to reset QNAP NAS with QTS 5.0
(Windows Phone Central)

There are actually five ways to reset your QNAP NAS running QTS 5.0, including soft and hard resets. The soft reset will only change your account and network settings while the hard reset will wipe all the drives, allowing you to start fresh much like Windows 11. How to reset your QNAP NAS Reset button There are two ways to use the reset button to change some settings on your QNAP NAS. The first soft reset only clears the network settings and resets the admin password to the MAC address of the enclosure. Press and hold down on the reset button for approximately three seconds until a beep sounds. Re-connect to the NAS using your browser. Enter username `admin.` The new password is the first MAC address (found on the NAS sticker under `MAC1`) . Once the NAS has been reset, the following takes place: TCP/IP configuration: Obtain IP address settings automatically via DHCP. TCP/IP configuration: Disable Jumbo Frame. TCP/IP configuration: If port trunking is enabled (dual LAN mo...